CloudLynx

CloudLynx is a cloud-based platform that collects data from NetLynx’s IoT devices for the purpose of near real-time analysis of raw data.

Data is then presented in meaningful reports and audit trail.

You can set flexible threshold conditions for notification via sms/push/voice messages.

 

ReDAC Controller

ReDAC is a stand-alone industrial grade appliance that monitors it’s eight digital inputs and sends out Alerts based on the status of the inputs.

Typical use cases are:

  • Power failure alert
  • Fire/Intrusion Alerts
  • Panic Button
  • HVAC Alarm

As long as a sensor or equipment can link to ReDAC via a dry contact, ReDAC can be used to to monitor the sensor/equipment.

We have 2 versions, ReDAC-ECM that connects to CloudLynx, and a standalone version that uses SIM Card to send out SMS alerts

ReDAC-IoT

ReDAC-IoT is connected to CloudLynx via 4G/NB-IoT network using NetLynx’s SIM cards.
Real Time status and also historical report of the inputs are available from CloudLynx.
Contact List and Trigger logics are also configured from CloudLynx.

ReDAC-SMS

This is a stand-alone version that that does not connect to CloudLynx. Instead, it sends out SMS via a SIM card. Contact List and messages are managed locally via a PC app connect via a USB cable.

ThermAlert

ThermAlert is a Temperature Monitor and Alert System that is used to monitor the temperature of an environment and sends out notification whenever the temperature has exceeded a pre-defined level.

Aside from Temperature, it can also send out alerts when there is a power failure. When power is cut off from the equipment, it will use its internal battery to send out the alerts.

This product is useful in cases where temperature needs to be controlled 24×7

  • small data centre
  • warehouse
  • Medical Fridge

An optional strobe light can be connected for visual alerts.

IoT Version

ThermAlert-IoT is connected to CloudLynx via 4G/NB-IoT network using NetLynx’s SIM cards.

Real Time status and also historical report of the inputs are available from CloudLynx. 

Contact List and Trigger logics are also configured from CloudLynx.

Stand-Alone Version

ThermAlert Standalone version does not connect to CloudLynx. Instead, it sends out SMS via a SIM card.  Contact list is managed locally via a PC app connected to the equipment via a USB cable.